In search of a simple efficient gold recovery process?

Let me tell you about mineral processing equipment that is being used with all round the world, by large scale mining operations through to artisanal miners.

It’s an option using cyanide.


One of the most simple and efficient technologies does Not want the use of dangerous chemicals.

Sure, using a cyanide solution for gold leaching is widespread. It’s the most common hydrometallurgical process for the extraction of gold from ores and concentrates.

BUT, as Wired magazine from the united kingdom points out.

The waste product from cyanidation is really a disgusting and toxic gloop that can seep into rivers or poison groundwater, killing wildlife and rendering landscape sterile. Huge pits of ore can encounter cyanide leaching in mines, with the runoff a major environmental hazard demands a significant cost to render solid.

Instead of that, why not use gravity?


Gravity separation of fine gold has been the working principle in many cost-effective mineral processing plants, all around turmoil.

That’s in both small-scale and large-scale mineral extraction business.

For example, a gold shaking table uses a low-capacity vibrating table for gold extraction.


Of course, it’s don’t just for extracting gold. Mineral extraction utilizing a concentrating table works for recovering other precious metals and minerals too, including all heavy minerals, heavy mineral sands, illmenite, rutile, gemstones, platinum, tin, wolfram, tantalite, zircon, topaz and diamonds.

The Wave Table is ideal for cleaning up sluice box concentrates and separating gold from black sands, in addition. The Wave Table is just the thing for cleaning up concentrates from Knelson, Falcon, Knudsen, STLBs and other centrifugal concentrators. (For large throughputs and capacity mining/processing operations, particularly for gold, we can help you with the least expensive Centrifugal Concentrators.)


Larger mines are using Wave Tables to perform final gold clean-ups as well as the finishing of gold focuses. This process eliminates the could do with cyanide or mercury.

Gold wave tables are lots better for your environment, for workplace safe and sound practices!


When you wish to efficiently recover fine gold from gold bearing ore, you want a Centrifugal Concentrator. For example, a 1-3 TPH unit will handle both alluvial and hard rock components.

In large mineral processing plant, stores use a Centrifugal Concentrator (known utilizing some countries being an STLB) to perform the primary concentration. That is, to extract all the gold and heavy minerals from ore take care of.

This recovered material is called the concentrates, or ‘cons’ for tight.


But really get clean gold, you need to then run the cons through another process (a secondary concentrator), such as running the cons more than a Wave Table. By doing this, an upgraded fraction is recovered which much smaller in mass, so its easier work with.

When concentrates are cleared up on a wave Table, you have produced clean gold ready to be smelted and turned perfect gold bar for selling.

All this without using cyanide or mercury.


Another cyanide-free option is chemical draining.

Gold can be extracted from run of mine ore as well as from concentrates by using the Chemical Leaching System, which is actually a cost effective non-cyanide gold leaching system that can help you with.

CLS can be used almost any metal but is particularly used for your recovery of gold, silver and platinum group mining harvests.


This incredible gold separation device is available 3 models covering all scales of operation. In spite of the name, a gold wave table works to extract ANY heavy mineral, where there is a specific gravity (density) differential between the dear heavy mineral constituent as well as the gangue or host fabrics. It also cleans grit and gold among the stripped carbon used in CIP/CIL software programs.


To quote Ian, a 30-year veteran in the mining and minerals industry, “I have personally had success with the Wave Table recovering very fine heavy minerals for instance gold, mineral sands, zircon, rutile, illmenite, tantalite, scheelite, stibnite et cetera. Because it is so efficient at recovering very fine particle sizes, it has proved excellent as a scavenger on tailings. The Wave Table will readily recover 5 micron gold from tailings. In mineral processing, it is often what you lose to tailings naturally as essential as what you recover. There really is that the Wave Table is lone device to evaluate tailings for lost heavy minerals, including gold. A simple test dealing with your tailings only will take a short while. You will observe any heavy mineral lost in the tailings inside a short life cycle. Such a test will obviate the require for lengthy fire assay finish times.”


The largest model may be the M10 which does considerably as 8TPH (tonnes per hour) and the M8 model does up to 1TPH. The smallest model, the M5, works for small cleanups of 20 kgs per hour and can be used as a laboratory unit.

– Gold wave tables are a lot better for the environment

– Better for workplace safety too

– Never use mercury or cyanide again

– Low water usage

– Efficient and cost-effective.

When you are looking for gold recovery plant for sale , check out


The Wave Table may be in the smallest to home loan houses gold my. They can be used for full scale production purposes, or simply as a clean-up or concentration device in the gold area.

The Wave Table will finally be increasingly employed to recover gold from test instances of a variety kgs in length and upwards. This form of bulk testing is quick and also the quantitative results mean that you aren’t just looking forward to fire assays or AAS, particularly in visible free gold deposits, even if for example the gold is ultra fine (5 to twenty microns).

Visit to find out more today.

We may assist you with a Chemical Leaching System, including supplies and training. Contact us for the CLS Manual on Non-Cyanide Leaching.